Joe's Gutters & Patios
Custom Aluminum Patio Covers in Kenner, LA
Joe's Gutters & Patios — building Kenner patio covers since 1999. Flat pan and insulated thermal-break panels, both engineered for Louisiana heat, humidity, UV, and direct-path hurricane wind. Permit drawings and submission coordination included. Louisiana License #CL.65670. State Farm $2M GL + Workers Comp. BBB A+. Free written estimates, no trip fee.
Call
(504) 813-4293 — Derel Broussard answers personally when he can. Same-day call-back guaranteed.
Same-Day
Call Back
Owner Supervised
Installs
No Trip Fee
Estimates
Financing Friendly
Options
Why Patio Covers Matter in Kenner
A covered patio in Louisiana isn't decorative — it's the difference between using your outdoor space and having one you look at from inside. Kenner homeowners spend serious time outside: crawfish boils, weekend gatherings, weeknight dinners on the back patio, morning coffee before the heat sets in. But two things make the uncovered outdoor space unusable for most of the year. The summer sun: by 9 a.m. on a clear July day, the heat radiating off an uncovered patio drives everyone inside. The storms: a Kenner summer thunderstorm can shut down a backyard event in under five minutes, and hurricane season brings months of unpredictability.
Aluminum is the only material that genuinely holds up to all of it. Wood rots in Louisiana humidity — usually within 8–12 years on covered structures, faster on exposed ones. Vinyl fades and goes brittle under sustained UV. Fabric awnings and retractable systems fail in their first storm season. A correctly built aluminum patio cover handles all of it: the heat, the humidity, the UV, and the wind load. And once it's up, it's structurally maintenance-free for decades.
The Homes We Build Covers for in Kenner
Patio cover work in Kenner runs across a housing stock dominated by 1970s–1980s ranch, split-level, and two-story tract construction — the median build year is 1977. Rivertown has older lots with deeper backyards and the kind of rear-elevation orientation that fits larger covers cleanly. University City runs newer in some sections and has tighter lot configurations in others, where setbacks influence cover sizing. Across Kenner, two patterns recur: lots that face south or west on the rear elevation (where insulated panels pay off most) and lots with existing wood patio covers that have rotted and need full replacement.
Climate & Exposure
Kenner sits squarely in the inland path of Gulf tropical systems. Sustained hurricane-force winds, storm-surge threat from Lake Pontchartrain, and 62+ inches of annual rainfall mean any aluminum exterior structure has to be built for hurricane-zone reality — heavier post profiles, deeper footings, and tighter fastening than what works in lower-risk states.
How We Do Patio Covers in Kenner
Two panel options, both in six baked-enamel colors:
Flat Pan — Clean Lines, Maximum Coverage Per Dollar
$12–$20 per square foot installed. A 24×15 cover runs approximately $4,300–$7,200. Clean minimal profile; best fit for utility areas, driveways, smaller spans, and contemporary home styles. Trade-off: higher rain noise than insulated, and the underside can radiate heat on hot afternoons.
Insulated Panels — Best Comfort for Entertaining Spaces
$26–$60 per square foot installed. A 12×16 cover runs approximately $5,000–$11,500. Foam-core with metal skins on both sides — a true thermal break. Under an insulated cover on a hot Louisiana afternoon, the perceived temperature can be 10–20 degrees cooler than under a non-insulated roof. Rain noise is the lowest of any option. Best fit for primary outdoor entertaining spaces, covers over 200 sq ft, any cover on a south- or west-facing elevation.
Six Factory Colors
White, Ivory, Wicker, Clay, Bronze, Black. Finish is baked-enamel — doesn't chip, peel, or need repainting.
Integrated Gutters and Downspouts
The cover roof drains like a regular roof into gutters that route water away from your foundation. We install this in-house.
Permit Coordination
Attached patio covers almost always require a building permit. Permits are the homeowner's responsibility; we provide drawings and coordinate with the Building Department. HOA approval is separate and adds 2–4 weeks — we provide submission materials.
What to Expect
Note: Joe's does not offer W-pan (ribbed) panels. Flat pan or insulated — those are the two options. For fan beams, motorized retractable screens, screen-wall conversions, or decorative columns, we handle all of it in the same project scope.
Signs this is the right call:
- Replacing a wood patio cover that's rotted out
- Replacing a fabric awning that's failed
- Adding a new cover where none exists
- Converting an existing cover into a full screen room — we add the screen walls
- Building over a second-story deck — possible, with structural assessment at the estimate
What's Included in Every Patio Cover Project
- Free written estimate, fully itemized, sent by email and text — usually same day
- On-site assessment from Derel Broussard personally — no subcontractors, no handoffs
- All materials and hardware — premium aluminum coil stock, factory-baked enamel finish in six colors, hurricane-zone structural hardware
- Permit drawings, HOA submission support, and Building Department coordination
- Full property cleanup at the end — debris bagged, removed material hauled off, site left clean
- Manufacturer warranty (available directly from the manufacturer) plus our 2-year workmanship warranty on labor for new installations
- Free insurance documentation if storm damage is part of the work
Pricing
Flat pan $12–$20 per sq ft; insulated $26–$60 per sq ft. Typical 24×15 ranges from $4,300–$21,600 depending on panel type. At Joe’s Gutters & Patios all estimates are free, and done on-site. Permit fee is the homeowner's responsibility and separate from the build cost.
Why Kenner Homeowners Choose Joe's for Patio Covers
A patio cover either holds up to Louisiana heat, humidity, and direct-path hurricane wind for 25+ years, or it fails inside 10. The five details below are what determine which one you get.
Post footings extended below Louisiana's active clay layer.
Shallow footings sized for drier states shift seasonally in Louisiana clay and gradually loosen the entire structure. We dig deeper.
Hurricane-zone post profiles and beam engineering.
Heavier aluminum than what contractors in lower-risk states typically use, with knee bracing at post-to-beam connections on larger spans for lateral stability under wind load.
Factory-baked enamel finish on every panel and trim piece
in our six-color palette. Doesn't chip, doesn't peel, doesn't need repainting — and no field-painted finish that fades inside two summers under Louisiana UV.
Permit coordination as part of the project.
We provide the drawings and handle Building Department submissions and HOA paperwork. The permit stays in your name (state law), but the paperwork burden doesn't have to land on you.
Derel Broussard on every job, personally.
25+ years of owner-operated work. No rotating subcontractor crews. The owner is on your project from estimate to final walkthrough.
Permits, Licensing, and Insurance — What Kenner Homeowners Should Know
Louisiana law requires any residential contractor working above the state's minimum threshold to hold a Louisiana State Licensing Board for Contractors license. Our LSLBC license is #CL.65670 — verify it directly at lslbc.louisiana.gov. Before contracting with any Kenner contractor, ask to see the current LSLBC number. We also carry State Farm $2M general liability and workers' comp, plus BBB A+ accreditation.
For attached patio covers specifically: the City of Kenner almost always requires a building permit, submitted plans, a formal application, and inspections during the build. The same is true across Jefferson, Orleans, and Plaquemines parishes. Permits are the homeowner's responsibility under Louisiana law, but we provide drawings and coordinate with the Building Department on your behalf. HOA approval is a separate process and typically adds 2–4 weeks; we provide submission materials for that as well.
Permit authority: City of Kenner Code Enforcement / Inspection — 1610 Reverend Richard Wilson Drive, Kenner, LA 70062 —
(504) 468-7280.
Same-Day
Call Back
Owner Supervised
Installs
No Trip Fee
Estimates
Financing Friendly
Options
Our Reviews
What Our Customers Say
★★★★★
"From the estimate to the completed job, everything was spot on. I like the fact that it's a father and son operation and a local company. The patio came out flawless and the guys cleaned up after themselves."
— Troy B. · Metairie, LA
Patio Covers FAQs — Kenner
Do you build patio covers in Kenner?
Yes — Kenner is part of our regular Core Service Area, served daily out of our Gretna shop. Most patio cover estimates are scheduled within 2–4 business days. Permit-approval timelines (typically 2–4 weeks after submission) are the variable we coordinate around.
How much does an aluminum patio cover cost?
Flat pan $12–$20 per sq ft; insulated $26–$60 per sq ft. A 24×15 runs approximately $4,300–$21,600 depending on panel type. Free on-site estimates.
Do I need a permit in my parish?
Jefferson Parish, Orleans Parish, and Plaquemines Parish all require a building permit for attached patio covers. Permits are the homeowner's responsibility. We provide drawings and support the submission.
How long does installation take?
Most installs complete in 1–2 days once materials are on-site. Permit approval (2–4 weeks) is the most variable timeline factor.
Which panel is right for me — flat pan or insulated?
Depends on the use. A 10×10 utility side porch works fine with flat pan. A 20×30 main entertaining area on a south-facing wall almost always wants insulated for the thermal break and quieter rain.
Can I add a screen room later?
Yes — screen room conversion is one of our most popular upgrades. Aluminum-frame screen walls attach to the existing cover's posts and roof edge.
Do you offer ribbed (W-pan) panels?
No. We install flat pan or insulated only. If W-pan is specifically what you want, we're not the right contractor.
Are you licensed and insured to work in Jefferson Parish?
Yes — our LSLBC license is #CL.65670 (verifiable at lslbc.louisiana.gov), and our coverage is State Farm $2,000,000 general liability and workers' compensation. A certificate of insurance is available before work begins.
Will you document storm damage for my insurance claim?s
At no charge. Written assessment, photographs, and a repair estimate in the format your insurer wants. Worth knowing first: Louisiana named-storm deductibles can run 2–5% of insured home value, which often shapes whether filing makes sense. Call Joe’s Gutters & Patios first — we'll scope the damage against your deductible so the decision rests on real numbers.
What warranty do you offer on patio covers?
On a new installation: the manufacturer's warranty (available directly from the manufacturer) and our 2-year workmanship warranty on labor. If something we installed fails due to workmanship, we come back at no charge. Repairs on existing structures aren't warranty-covered — pre-existing conditions on someone else's build are outside what we can underwrite.
Other Services in Kenner
The full exterior aluminum scope is in our work across Kenner — gutter installation, repair, cleaning, leaf guards, and downspouts, plus patio covers, screen rooms, carports, and aluminum awnings.
Seamless Gutter Installation · Gutter Repair · Leaf Guards · Downspouts · Gutter Cleaning · Patio Covers · Screen Rooms · Carports · Aluminum Awnings
Back to the Metairie city hub :
Metairie Gutter Company →
Ready to Get Started on Your Kenner Patio Cover Installation Project?
From Rivertown to University City and across Kenner, the city is on our regular weekly route. Call about a new patio cover, a flat-pan-versus-insulated comparison, a free design consultation, or any aluminum project on your home. Same-day or 24-hour response, with every estimate written, itemized, and sent by email and text the same day.
Ready to Work With Gretna's Local Gutter Company?
Aluminum
Aluminum gutters offer a strong yet lightweight solution ideal for Louisiana’s humid and rainy climate. Their natural resistance to rust ensures dependable performance and long-term durability. Available in various colors, aluminum gutters can be customized to match your home’s exterior while requiring minimal maintenance.
Copper
Copper gutters deliver a premium appearance paired with outstanding longevity. Over time, they develop a rich, natural patina that adds character and visual appeal to your home. Known for their exceptional strength and resistance to corrosion, copper gutters provide both beauty and long-term value.
Call (504) 813-4293
State Farm $2M GL + Workers Comp · BBB A+ · Louisiana #CL.65670 · Family-owned since 1999 · No trip fee · Serving Kenner and Greater New Orleans 7 days a week.